500 Watt Heater Specifications

Model BIO-500F/120v

• Cabinet: All Metal 22 & 24 gauge
• Weight: 8.0 lbs
• Dimensions: 18 x 4 3/8 x 4 (H,W,D)
• Power Requirements: 120 Volt AC 500 Watt
• Power Supply: Requires isolated 12 gauge wire to fuse panel
• Chassis Safety Insulation: Exceeds all government and independent laboratory standards for safety in an installed heating appliance (a safety standard that exceeds other manufacturers specifications).
• Internal Ceramic Blanket: Provides R45 insulation between the wall and the heater. The heater cabinet installed in the wall remains cool to the touch while delivering warm (160° F) infrared heat into the room.
• Life Expectancy: 25 years+
• Thermostat Power Requirement: None - the unit contains its own low voltage power supply for thermostat operation
• Thermostat Type: Any 12-24 volt low-voltage thermostat (not supplied)
• Zoned Heat Capability: Pre-wired - simple two-wire contact to any zone control panelcan also accept multiple parallel hook-ups to a single low-voltage thermostat
• Safety Cut-Off: Yes
• Listed Approvals: CTUV-US & International (UL Equivalent)
• Installation: Any wall with a minimum 3 ½ inches of depth
• Heat Type: Therapeutic far infrared heat
• Heat Chamber: Copper lined for maximum ion transfer
• Heating Elements: One (1) ceramic infrared emitter 500 watt
• Ceramic Life Expectancy: Rated at 40,000 hours
• Heat Output: 2,800 BTU infrared heat
• Fan System: One (1) high volume, low noise 90mm DC fan
• Frequency Hum: There is no AC 60Hz frequency hum as with other in-wall systems
• Fan Noise Level: 18 dBpractically silent
• Warranty: 3-Year P & L. 5-Year ceramic emitters.